User Manual

Screens of the File Menu
User’s Guide
TF Editor
- 88 -
Parameters that can be edited in the Edit area
Stereo Link
Setting and releasing Stereo Link can be performed using the context menu. You can display the context menu by right-
clicking (Windows) or control-clicking (Mac) while a channel is selected.
Linked channels are indicated by an icon of a chain.
Stereo Link is not displayed on the DCA tab.
Channel Icon
Click to display a menu of available channel icons.
Channel Name
Click to enter a name for the channel.
Channel Color
Click a color to assign a color to the channel.
Input Select
Displayed only on the Input tab.
Allows you to set the channel's input source (input port) to INPUT, USB, or SLOT.
When you change this setting, a confirmation message is displayed.
+48V
Displayed only on the Input tab.
Turns phantom power on and off for the input port specified by the Input Select setting.
HPF
Displayed only on the Input tab.
Turns the HPF (high-pass filter) on and off.
DCA
Displayed only on the Input tab.
Allows you to make DCA assignments.
OMNI OUT
Displayed only on the Output tab.
Allows you to patch output channels to OMNI OUT.
When you change the OMNI OUT setting, a confirmation message is displayed.
SLOT
Displayed only on the Output tab.
Displays the port number of the SLOT output for each output channel. (Displayed for reference only.)