User Manual

Technical Data Sheet

1 / 4

I/O Rack Tio1608-D

Overview

The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/line

inputs and 8 line outputs.

Features

• 3U size, 16 inputs and 8 outputs.

• Dante network protocol contributes to greater system scalability and ﬂexibility

• Supports QUICK CONFIG Mode for TF series

• Automatic digital-stage compensation for analog gain changes (CL/QL series only)

• Features recallable D-PRE preampliﬁers

Rear Panel

PAGE 1
I/O Rack Tio1608 -D Overview The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/line inputs and 8 line outputs. Rear Panel Features • 3U size, 16 inputs and 8 outputs.
PAGE 2
I/O Rack Tio1608 -D Specifications General Specifications 44.1kHz +4.1667%, +0.1%, –0.1%, –4.0% Analog Input Characteristics ±200ppm Input GAIN Terminals Sampling Frequency External Signal Delay Less than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Frequency Response +0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz Total Harmonic Distortion*1 Less than 0.
PAGE 3
I/O Rack Tio1608 -D Dimensions Unit: mm (inch) Software • R Remote Technical Data Sheet 3/4
PAGE 4
I/O Rack Tio1608 -D Architectural and Engineering Specifications The Yamaha Tio1608-D shall be an I/O rack optimized for use with Yamaha TF series digital mixing consoles. It shall have built-in Dante digital audio networking capability and allow flexible, easy system setup. Connection to TF series or other digital mixer via a Dante network shall provide low-jitter, low-latency audio transmission. Setup shall be fast and easy using the QUICK CONFIG functionality of TF series digital mixing consoles.