User Manual

R Remote Version 4.1 User’s Guide 31
Updating the Firmware
This guide explains how to update the R series (Rio3224-D, Rio1608-D, Ri8-D, Ro8-D, RSio64-D and RMio64-
D) and Tio1608-D firmware by using the R Remote (V4.1 or later).
Precautions
 Note that the device may be damaged if you fail to follow these instructions properly, or turn off the device
or disconnect the cable while the update is in progress.
Updating – Operation Overview
1
Verify that your computer meets the updating requirements of the firmware.
(Page 4)
2
Connect your computer to the device. (Page 32)
3
Configure the network settings. (Page 9)
To update the RMio64-D firmware, IPv6 must be enabled on the computer.
4
Update. (Page 35)