User Manual

Table Of Contents

R Remote Version 4.1 User’s Guide 21

④ SLOT1～4 [SRC] indicators

Indicate the Sampling Rate Converter (SRC) status for slots 1 to 4.

Off

SRC is off.

Green (On)

SRC is on, and the clock selected with the SRC WCLK DIP switches on the RSio64-D

is being input correctly.

Red (On)

SRC is on, but an appropriate clock is not being input. The clock selected with the

SRC WCLK DIP switches on the RSio64-D is either not being input or is not within the

operating range. Either turn SRC off, or change the DIP switch settings.

Use the SRC WCLK DIP switches on the RSio64-D to set the SRC clock sent to the Mini-YGDAI card

inserted in the slot.

⑤ SLOT1～4 [SRC] buttons

Used to turn SRC on/off at both IN and OUT for each slot.

⑥ WORD CLOCK source

Indicates the SRC word clock source status for slots 1 to 4 the RSio64-D.

SLOT

When using the word clock signal being input from the card in the slot.

WCLK IN When using the word clock signal being input from the WORD CLOCK IN connector

on the rear panel.

CARD

When the SRC function in the card is on.

----

If there is no card in the slot.

⑦ WORD CLOCK select button

Used to select the word clock source for the RSio64-D.

 WORD CLOCK WCLK IN indicator

 WORD CLOCK SLOT1 1/2 indicator

 WORD CLOCK DANTE indicator

Indicates the word clock source status for the RSio64-D.

WCLK IN On when using the word clock signal being input from the WORD CLOCK IN

connector on the rear panel of the RSio64-D. Flashes*1 if there is no valid word clock

input.

SLOT1 1/2 On when using the word clock for channels 1/2 of slot 1 for the RSio64-D. Flashes*1 if

there is no valid word clock input. When using MY8-AEB*2, the word clock for

channels 7/8 is used.

DANTE

On when using the word clock for the Dante network*3. (If there is no valid Dante

signal input, the internal Dante module will generate a clock.)

*1 When flashing, Dante word clock*3 input/output is used.

*2 If you are using MY8-AEB, set the AE⇔ RSVD switch for the card to RSVD.

*3 If you make changes to the frequency of the Dante word clock, use Dante Controller.