User Manual

1. Introduction
1.1. About Yamaha LAN Monitor
The Yamaha LAN Monitor provides information on Yamaha switches, and is used to monitor and control
connected devices on your computer.
The main functions are as follows.
• You can detect the network topology and visualize the entire network.
• The port status, bandwidth, and power supply status of Yamaha switches can be viewed.
• You can monitor the status of each Dante-enabled device that exists on the network.
• You can also access Dante Controller with a single click, and unify the Dante network from a
single computer.
• You can confirm the presence of network cameras (for emergency monitoring) and other devices.
• By registering the destination URL, you can access a terminal’s GUI (such as a network camera)
with a single click.
• Stopping and restarting the power supply from a Yamaha PoE switch to automatically/manually
restart devices connected to a Yamaha PoE switch.
• You can open the Web GUI of a Yamaha switch on the network to view or edit its settings.
• You can view and change the settings of SWX2110/SWX2110P series devices that are not
equipped with Web GUI.
• The snapshot function is useful for automatically testing network abnormalities or
troubleshooting.
• You can update the firmware of your Yamaha switch, and import or export the CONFIG file for
your Yamaha switch or Yamaha wireless LAN access point.
• You can assign identification labels to each device.
• The Yamaha LAN Monitor software is the follow up to the Yamaha Audio Network Monitor.
Yamaha LAN Monitor can load snapshots and labels saved in Yamaha Audio Network Monitor.
1. Introduction
4 | Yamaha LAN Monitor for Mac User Guide