User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
Frame counter
reset
Resets the frame counter.
Click the [Execute] button to display a “Frame counter reset” confirmation
message.
Firmware Update
Updates the firmware of the switch.
Click the [Execute] button to display the “Firmware Update” dialog box.
CONFIG export
Export the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG export” dialog.
CONFIG import
Import the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG import” dialog.
Restart
Restarts the switch.
Click the [Execute] button to display a “Restart” confirmation message.
Initialize
Initializes the switch.
Click the [Execute] button to display an “Initialize” confirmation message.
Port settings
Click the [Port settings] tab, and then click a port number to display the following setting
items.
Basic functions
Configures the basic functions of the port.
Click the [Settings] button to display the “Basic functions” dialog box.
Tag VLAN
Configures the tag VLAN settings.
Click the arrow ( ) to display the [Settings] button.
Click the [Settings] button to display the “Tag VLAN” dialog box.
PoE power supply
Configures the PoE power supply settings.
This is displayed only for the SWX2110P-8G.
Click the [Settings] button to display the “PoE power supply” dialog box.
11. Configuring the device
Yamaha LAN Monitor for Mac User Guide | 49