User Manual

YDIF model
Numbe
r
Component name Details Link
①
Power This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
③
ANALOG IN Sends the audio signal input
from the analog input terminal.
-
④
Redundancy Sets the pilot tone detection
setting during Redundant mode.
"Redundancy" component editor
⑤
ATT This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
⑥
Polarity This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
⑦
SPEAKER OUT Displays the speaker output
terminal’s output voltage and
output current.
"Speaker Out" component editor
⑧
YDIF IN Sends the audio signal input
from the [YDIF] terminal.
-
⑨
YDIF Patch Selects the YDIF audio channel
that will be input to each
amplifier’s input channel.
"YDIF Patch" component editor
17. Power Amplifiers : XMV-series
284 | ProVisionaire Design User Guide