User Manual

If the check box is selected, the Nominal function will be on.
[Nominal Value] specifies the nominal value.
[Nominal LED Position] specifies the LED position that will light when the level reaches the nominal value.
If the check box is cleared (Nominal function off), both parameters will be grayedout and unavailable.
◦ [Sensitivity] list box
Sets the sensitivity of parameter changes in response to the rotary operation of the DCP knob.
If [Acceleration] is on, the parameter will change faster if the knob is rotated more rapidly. If [Fast]
is selected as the [Sensitivity], the [Acceleration] setting is dimmed and unavailable.
• [MTX Source Select]
For usage, refer to [MTX Source Select] in the DCP component: Settings dialog (switch).
For parameters, refer to [MTX Level / MTX Send Level].
● [Dimmer & Lock]tab
This sets the brightness of the LEDs on the DCP unit and the settings for the resting state.
•
[LED Brightness]list box
Specifies the brightness of the DCP unit’s LEDs. Higher values will make the LEDs brighter.
26. DCP
340 | ProVisionaire Design User Guide