User Manual

10.11. "Match Devices by IP Address" dialog box
When you assign an IP address to a virtual device in this dialog box, ProVisionaire Design searches for devices
on the network by IP address.
If you want to control a system that is on a different subnet than ProVisionaire Design, make settings here.
For the procedure, refer to "Settings for controlling devices across subnets".
Dante audio communication is not possible between devices that are on different subnets.
Set the IP addresses so that they are unique for the entire communication path. If devices of the same IP
address exist on the communication path, they might not be distinguishable.
10. Dialog boxes
74 | ProVisionaire Design User Guide