User Manual

10.14. "Initialize" dialog box
To open this dialog box, click the [Initialize] button in the [Device Information] dialog box. This dialog box enables
you to initialize the device settings.
Target products include PC series, DME7, RM-CG, and RM-TT.
Select the tab for the product you wish to initialize.
■ For the PC series
•
Check boxes
Add a check mark to the check boxes for the items you wish to initialize.
◦ IP Settings
If this item is checked, the device IP settings will also be initialized.
◦ Unit ID, Device Name
If this item is checked, the device’s Unit ID and the name will also be initialized.
◦ Dante Settings
If this item is checked, the Dante-related settings for the device will also be initialized.
•
[All On] button
Adds a check mark to the check boxes for all devices.
•
[All Off] button
Clears the check mark from the check boxes for all devices.
•
Check box
Add a check mark to a device that you wish to initialize.
◦ Unit ID / Model / Device Name
These columns indicate the device Unit ID, device model name, and device name.
To change the device name, use the [Device Name] field in the “Properties” area of the “Project”
sheet.
•
[All Model On] button
Adds a check mark to the check boxes for all devices on all tabs.
•
[All Model Off] button
Clears the check mark from the check boxes for all devices on all tabs.
10. Dialog boxes
82 | ProVisionaire Design User Guide