User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
MTX-MRX Editor User Guide
139
Chapter 5. Online and Synchronization
You can connect the MTX/MRX to your computer and send the settings created using MTX-MRX
Editor to the MTX/MRX, or synchronize the MTX/MRX with MTX-MRX Editor and edit the
settings. You can also load data from the MTX/MRX into MTX-MRX Editor.
The state in which the MTX/MRX and MTX-MRX Editor operate in synchronization is called the
“online state.” The action of bringing them into this state is called “Synchronization.”
Synchronization will match the settings of MTX-MRX Editor and the MTX/MRX itself; when the
settings of both are in a matching state, they will go online, allowing the MTX/MRX to be
controlled in real time.
If emergency mode occurs, the system will go offline. It is not possible to synchronize with an
MTX/MRX system that is in emergency mode.
Online
To go online with MTX-MRX Editor, you can either click the [Online] tool button to access the
“Synchronization” dialog box, or choose the [File] menu command [Go Online – From Devices] to
access the “Go Online – From devices” dialog box. For details on when each method is appropriate,
refer to Synchronization.
❑ “Synchronization” dialog box
• [To Device] option button
Choose this if you want the settings of MTX-MRX Editor to be applied to the MTX/
MRX system.
• [From Device] option button
Choose this if you want the settings of the MTX/MRX system to be applied to MTX-
MRX Editor.
• [OK] button
Click this to switch to a display that lets you choose the system that will be
synchronized.
•[Cancel] button
Click this to close the dialog box without synchronizing.
NOTE