User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Settings” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
155
If [Play 1 song] is selected
Only the file currently selected in [SD CARD:/] will play.
The following file and folder formats can be shown.
• (folder name)\(file name).mp3
• (folder name)\(file name).wav
•(file name).mp3
•(file name).wav
If [Play all songs in a folder] is selected
All files saved in the folder currently selected in [SD CARD:/] will play.
The following folder formats can be shown.
•(folder name)
•blank
- Only first-level folders are valid.
- If the folder name is blank, all the files that exist in the root level of the SD memory
card will be played (folders below the root level will not be included).
✦[Browse] button
When you click this, a screen will appear, allowing you to select the file or folder
to be played.
If [Play 1 song] is selected, choose a file.
If [Play all songs in a folder] is selected, choose a folder.
- Only first-level folders are valid.
- If the folder name is blank, all the files that exist in the root level of the SD memory
card will be played (folders below the root level will not be included).
❍ Play Mode
✦[Normal]/[Repeat]/[Shuffle Repeat]
This specifies the play mode for the file or files.
If you choose [Normal], the specified file or files in the folder will play once.
If you choose [Repeat], the specified file or files in the folder will play repeatedly.
If you choose [Shuffle Repeat], the files in the specified folder will play repeatedly
in random order. If you choose [Play 1 song] in [Folder/File], the [Shuffle Repeat]
setting will be unavailable.
✦[Go to the top when playback stops.]
This is always on; playback will always start from the beginning of the song or the
first song in the folder. (This is unchangeable only for preset recall.)
• [Interval Time]
This specifies the playback spacing when files are played consecutively.
• [OK] button
Saves the settings and closes the dialog box.
•[Cancel] button
Closes the dialog box without saving the changes.
NOTE
NOTE