User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Update Firmware” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
168
“Update Firmware” dialog box
This dialog box lets you update the firmware of a unit such as an MTX/MRX or XMV.
For Dante units such as the MTX5-D and the XMV8280-D, there may be cases in which
the Dante firmware needs to be updated. For details on how to update the Dante firmware,
refer to the “MTX/MRX system Firmware Update Guide.”
• In some cases, updating may cause data to no longer be compatible. Save the latest
project file before you update. After you update, use the most recent version of MTX-MRX
Editor to open the latest project file.
• To update the firmware of the R series (AD/DA) or Tio1608-D, use the Windows software
application R Remote.
● File
Displays the .fup files that are in the folder containing the update file shown in the
“Firmware in this file” section.
● [...] button
Click this button to select an update file. Click this button to select an update file.
Clicking this button opens the “Select Folder” dialog box; select an .fup file.
● Firmware in this file
Shows firmware versions resident in the folder for each device.
● Detected Devices
Shows detected devices.
Unit ID................... Shows the UNIT ID of the device.
Type ........................ Shows the model name of the device.
Version ................... Shows the firmware version of the device.
NOTE