User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Scheduler” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
193
● [REPEAT EVENT]
By selecting this check box you can specify a repeating event.
• [Yearly]/[Monthly]/[Weekly]/[Daily]/[Hourly] boxes
Specify the frequency with which the event will occur.
• Event start date and time
Specify the date and time at which the event will occur repeatedly. The items that
you can specify will depend on the frequency of the event.
If the event frequency is [Yearly]
If [Day of the Month] is on, the event will occur each year at the date and time
specified by “-month,” “1st/2nd/3rd/4th,” “day of the week,” and [Time].
If [Day of the Month] is off, the event will occur each year on the day selected in the
calendar (shown in [Date]) at the time selected in [Time].
If the event frequency is [Monthly]
If [Day of the Week] is on, the event will occur each month at the date and time
specified by “1st/2nd/3rd/4th,” “day of the week,” and [Time].
If [Day of the Week] is off, the event will occur each month on the day selected in
the calendar (shown in [Date]) at the time selected in [Time].
If the event frequency is [Weekly]
The event will occur each week on the selected day of the week at the time specified
by [Time].
If the event frequency is [Daily]
The event will occur each day at the time (hour:minute:second) specified by [Time].
If the event frequency is [Hourly]
The event will occur each hour at the time (minute:second) specified by [Time].