User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Wireless DCP” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
206
❑ “Wireless DCP” dialog box
Here you can assign the parameters of the MTX/MRX to controls of the “Wireless DCP” iOS app
so that they can be operated from Wireless DCP. You can’t make settings while online. (Settings can
only be viewed.)
For details on Wireless DCP, refer to the “Wireless DCP User’s Manual.”
You can store 32 sets of Wireless DCP settings in the Library. You can also associate library
items with presets for recall.
• Associate the saved library item with a preset. If it is not associated, the Wireless DCP
settings will not be applied.
• The [Source Select] tab is shown if there is an MRX unit in the MTX/MRX system. For details,
refer to “MRX Designer User Guide.”
For details on the following settings, refer to “Digital Control Panel” dialog box.
• [Save] button
• [Load] button
•[Library] list
• [Copy] button
•[Paste] button
• [Clear] button
• Control select buttons
• [FUNCTION]/[DEVICE]/[PARAMETER]
•“Settings” dialog box
• [Close] button
● MTX/MRX selection box
Here you can select the MTX/MRX to which the iPhone or other mobile device that
you want to specify is connected. These are shown in order of UNIT ID and model
name.
● [Page] tabs
Select the page tab that you want to edit.
NOTE