User Manual

List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
237
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER1]
Specify the channel that will control the on/off setting of the parameter.
● If [FUNCTION] is [MTX Send ON] (switch only)
The switch turns the send on/off.
Select one of the following parameter types, and then make the appropriate setting.
•Input Ch Send ON
•Fx RTN Send ON
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER1][PARAMETER2]
Specify the channel that will control send on/off.
● If [FUNCTION] is [MTX Priority Ducker ON] (switch only)
The switch turns the zone’s Ducker on/off.
Select one of the following parameter types, and then make the appropriate setting.
•1st Priority
•2nd Priority
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER 1]
Select the ZONE that will control Ducker on/off.
● If [FUNCTION] is [MTX Dugan Automixer] (switch only)
The switch turns the parameter on/off.
Select one of the following parameter types, and then make the appropriate setting.
•Override (master)
•Mute (master)
•override (Ch)
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER 1]
For Override (master) and Mute (master), select the group that controls on/off. For
override (Ch), select the channel that controls on/off.