User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
238
●If [FUNCTION] is [SD Play] (switch only)
Play/stop the audio file that is specified by the switch.
Select one of the following parameter types, and then make the appropriate setting.
•SD Song Select & Play
•SD Song Pause
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [Folder/File] (only if parameter type is [SD Song Select & Play])
Here you can select the song or folder that you want to play from the SD memory card.
✦[Play 1 song]/[Play all songs in a folder]
If you choose [Play 1 song], only the song currently selected in [SD CARD:/] will play.
If you select [Play all songs in a folder], all songs saved in the folder selected by [SD
CARD:/] will play.
Up to 100 songs will be played in ascending order of their file name.
✦[SD CARD:/] box
This shows the name of the song that will be played, or the name of the folder. You can
change the name, or enter it directly.
You can also enter Japanese.
✦[Browse] button
If [Play 1 song] is selected
Select the file shown in [SD CARD:/].
The following file and folder formats can be shown.
• (folder name)\(file name).mp3
• (folder name)\(file name).wav
•(file name).mp3
•(file name).wav
NOTE
NOTE