User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
GPI Input/GPI Output
MRX Designer User Guide
141
❑ GPI Input/GPI Output
For details on these settings, refer to “MTX-MRX Editor User Guide.”
If [FUNCTION] is [MRX Parameter]
Parameters can be registered in the following ways.
If [FUNCTION] is [MRX Parameter Sets] (Input only)
Select the snapshot or snapshot group that will be recalled by a signal from the [GPI IN]
connector.
Registration source Registration method
Component editor / Link
Master editor / Parameter
setting window
While holding down <Ctrl>, drag and drop a parameter onto the
[PARAMETER] field.
“Parameters” area
*1
*1. You can also use <Shift> or <Ctrl> to simultaneously register multiple parameters in a list.
Drag and drop a parameter onto the [PARAMETER] field.
“Parameter Link Group”
area
While holding down <Ctrl>, drag and drop a parameter link group
onto the [PARAMETER] field.