User Manual

48
SH2 Owner’s Manual
 Example of using the [AUX IN] jack
The [AUX IN] jack is a stereo mini jack.
By connecting the [AUX IN] jack to other sound modules or playback devices (such as portable music players),
you can use the Silent Piano™ function together with the sound received from the connected devices.
You can use the [VOLUME] control on this unit to simultaneously adjust the volume of its electronic sound
and the sound received through its [AUX IN] jack. To set a proper balance of the levels, adjust the output
volume on the connected device.
NOTICE
Do not route the output from the AUX OUT jacks to the AUX IN jack. If you make this connection, the signal input at
the [AUX IN] jack is output from the AUX OUT jacks. These connections could result in a feedback loop that will
make normal performance impossible, and may even damage the equipment.
NOTE
By default, this instrument uses a convenient Noise Gate effect to cut unwanted noise from the sound input via the [AUX IN]
jack. However, this may result in necessary sounds also being cut, such as the soft decay sound of a piano. To avoid this, set
the Noise Gate to off (page 43).
Control unit bottom panel
[AUX IN]
stereo mini jack
Audio cable
Other sound modules
Portable music player, etc.
or
Audio signal