User Manual
Table Of Contents
Smart Device Connection Manual for Android
6
Connection B: Direct connection by using a USB wireless adaptor
This connection is only for instruments which have the Access Point mode function or Ad Hoc mode function. If you
are using an instrument which does not have one of these functions, follow the instructions of Connection C
(page 7).
NOTE
Please note that when the instrument is connected, no Internet access is available on your smart device, limiting part of their functions, such as
mailing and searching.
NOTE
Since the operations differ depending on the instrument, refer to the Owner’s Manual or the Reference Manual of your instrument as well.
If the wireless LAN function is included to the instrument, skip the steps 1 and 2 below.
1 Turn off the power of the instrument.
Quit any open app on your smart device.
2 Connect the USB wireless LAN adaptor to the USB TO DEVICE terminal of the instrument.
3 Turn on the power to the instrument.
4 Switch the instrument’s wireless LAN setting to the Access Point mode or Ad Hoc mode.
5 As necessary, set the SSID and so on.
You can make various settings (such as SSID, security, password, channel, key), although the specific settings
differ depending on the mode used by the instrument. If you have two or more instruments to connect, set the
SSID and channel to different values on each instrument.
6 Save the settings on the instrument.
7 Connect the smart device to the instrument.
7-1 Call up the Wi-Fi display on your smart device by tapping “Settings” “Wi-Fi.”
7-2 Turn on the Wi-Fi.
7-3 From the network list shown on the display, tap the instrument that you set to Access Point mode or Ad Hoc mode.
If the key is required, input the key, then connect.
8 Use the app on your smart device to communicate with the instrument.
NOTE
Some apps need the appropriate setting to communicate with the instrument. For details, refer to the relevant app manuals.
Required devices
• USB wireless LAN adaptor UD-WL01 (This is unnecessary if the wireless LAN function is included on the
instrument.)
1
Smart device
USB wireless
adaptor (UD-WL01)
Wireless LAN
Instrument