User Manual
Numbe
r
Component name Details Link
㉒
Output Ch Performs signal processing on
the output channel.
"Output CH" component editor
㉓
Output Fader Adjusts the level of the output
channel.
---
㉔
Post on Input Fader
The output signal from ⑩ [Input
Fader] or ⑫ [Dugan Automixer].
---
㉕
Post on Zone Out
The output signal from ⑳ [Zone
Out Fader].
---
㉖
Output Patch Assigns output signals to the
various types of output
terminals.
---
㉗
YDIF Out Patch Assigns output signals to the
[YDIF] terminal.
---
㉘
Pilot Tone Sets the pilot tone. "Pilot Tone" component editor
㉙
Analog Out Displays the settings related to
the [OUTPUT] terminal output
and the level of the audio signal
being output.
"Analog Out" component editor
㉚
Dante Out(MTX5-D only) Specifies the Dante output-
related settings.
"ProVisionaire Design DME7 Component
Guide"
㉛
Slot Out(MTX5-D only) Displays the settings related to
the Mini-YGDAI card output and
the level of the audio signal being
output.
"Slot Out" component editor
㉜
YDIF Out Outputs to the [YDIF] terminal.
---
㉝
Input DCA Groups Sets the DCA group for the input
channel.
"DCA Groups"/"Mute Groups" component
editor
㉞
Input Mute Groups Sets the mute group for the input
channel.
"DCA Groups"/"Mute Groups" component
editor
㉟
Zone DCA Groups Sets the DCA group for the ZONE
output.
"DCA Groups"/"Mute Groups" component
editor
㊱
Zone Mute Groups Sets the mute group for the
ZONE output.
"DCA Groups"/"Mute Groups" component
editor
14. Audio Processors : MTX5-D/MTX3
214 | ProVisionaire Design User Guide