User Manual
16.8.4. "Speaker Processor" component editor
「PEAK LIMITER」/「RMS LIMITER」
This is not shown if the corresponding jack is set as a high-impedance connection such as 70V or 100V.
•
[ON] button
Turns the limiter on/off. If the button is off, the limiter will be bypassed.
•
Gain Reduction indicator
This will light when the threshold value is exceeded.
•
[Threshold] knob
This specifies the threshold value at which the limiter applies, in terms of output power (W).
•
[Attack] knob
Specifies the speed at which the limiter will take effect.
•
[Release] knob
Specifies the speed at which the limiter will release.
•
"GR" meter
Indicates the amount of gain reduction.
16. Power Amplifiers : PC-series
266 | ProVisionaire Design User Guide