User Manual

10.13. "Update Firmware" dialog box
To open this dialog box, click the [Update Firmware] button in the [Device Information] dialog box.
Update the firmware of a supported unit.
For details on how to update the Dante firmware, refer to the "Dante Firmware Update guide" .

The DME7 updates the Dante firmware at the same time as updating the firmware of the unit.
•
Files
Shows the currently selected update file (.fupd).
•
[…] button
Click this button to select an update file. Clicking this button opens the "Select Folder" dialog box; select
an .fupd file.

When installing ProVisionaire Design, the .fupd file included in the compressed file is also
copied to the Program Files (x86) folder. This file is automatically selected when the dialog is
opened.
•
Firmware in this file
Shows the contents of the update file.
•
Detected Devices
Shows the detected devices.
◦ Check boxes
Enables you to select a target device to update.
◦ Unit ID
Indicates the UNIT ID of the device.
◦ Type
Indicates the model name of the device.
10. Dialog boxes
80 | ProVisionaire Design User Guide