User Manual

YC88 YC73 YC61 Supplementary Manual 5
Additional Parameters for FM Organ Types
Added FM Color Type to SETTINGS—Drawbar Color.
The new FM Organ type drawbars add two attributes; in addition to the carriers, the modulators and feedback are
also included. For these types of organs, the carrier will be the same color as the color set in Upper/Lower, but the
modulators and feedback loops are divided into colors related to the carrier color.
Drawbar Color
Function name
Description
Upper
Sets the colors of the drawbar LEDs. These can be set independently for Upper and Lower.
Settings: White, Red, Yellow, Green, Cyan, Blue, Magenta
Initial setting: Upper = White, Lower = Red
Lower
FM
Color Type
Sets the color combination of the drawbar LEDs. It can be divided into up to 3 colors according to the
attributes of carrier, modulator, and feedback.
Settings: 1 Color: Carriers, modulators and feedback are all the same color
2 Colors: Two different colors; one for the carriers and one for the others (modulator,
feedback)
3 Colors: Carriers, modulators and feedback are all different colors
Initial setting: 3 Colors
NOTE
H type organs and F1 to F3 FM organs always have the colors set for Upper and Lower regardless of the
FM Color Type.
Comparison of old and new tree diagrams
･V1.00, V1.10
･V1.20
Settings
Settings
└
Drawbar Color
└
Drawbar Color
├
Upper
├
Upper
└
Lower
├
Lower
└
FM Color Type
New EQ Type
YC88/YC73/YC61 V1.20
Category Type name Express Description Stereo/Mono
EQ
Tone Control
Shelving equalizer.
Use the [DEPTH] knob to adjust the low band, and the [RATE]
knob to adjust the high band.
Stereo
1 Band EQ
Narrow
Peaking equalizer with narrow Q (bandwidth).
Use the [DEPTH] knob to adjust the gain, and the [RATE] knob
to adjust the center frequency.
Stereo
1 Band EQ
Wide
Peaking equalizer with wide Q (bandwidth).
Use the [DEPTH] knob to adjust the gain, and the [RATE] knob
to adjust the center frequency.
Stereo