User Manual
Table Of Contents
- Contents
- New Rotary Speaker Effect
- Rotary speaker effect settings
- Selection of rotary speaker effects
- New Organ Types
- Additional Parameters for FM Organ Types
- New EQ Type
- New Touch Sensitivity Parameter
- Menu Layout Changes for EG Control and Filter Control
- New Live Set Sounds
- Change Split Point for Live Set Sound
- New Voice
- Changing the setting method of vibrato (CC # 1: Modulation)
- Improved operability
- Live Set Sound List
- Voice List
YC88 YC73 YC61 Supplementary Manual 6
New Touch Sensitivity Parameter
[SETTINGS] button → [Sound] → Select the voice section* to be set → [Touch Sensitivity]
(* Key A Settings / Key B Settings)
Touch Sensitivity has been added to SETTINGS, and can be set for the Voice sections of Key A and Key B.
Touch Sensitivity
Function name Description
Depth
This parameter can be used to select how the velocities with which keys are played will affect the
velocities actually output to the tone generator for the current Voice section. As shown in the graph
below, the larger the value set, the greater the degree to which output velocities vary in response to
changes in the playing velocity (i.e., the steeper the slope of the graph).
If a value of 0 is set, the output velocities will be totally unaffected by different playing velocities,
resulting in an response similar to that of an organ, where playing strength has practically no effect on
the sound produced.
Settings: 0 – 127
Initial setting: 64
When Offset (below) is set to 64:
Velocity actually output
to tone generator
Velocity with which key is played
Depth=64
Depth=32
Depth=0
Depth=
127