User Manual
Table Of Contents
- Contents
- New Rotary Speaker Effect
- Rotary speaker effect settings
- Selection of rotary speaker effects
- New Organ Types
- Additional Parameters for FM Organ Types
- New EQ Type
- New Touch Sensitivity Parameter
- Menu Layout Changes for EG Control and Filter Control
- New Live Set Sounds
- Change Split Point for Live Set Sound
- New Voice
- Changing the setting method of vibrato (CC # 1: Modulation)
- Improved operability
- Live Set Sound List
- Voice List
YC88 YC73 YC61 Supplementary Manual 7
Function name Description
Offset
This parameter can be used to raise or lower all velocities output to the tone generator for the current
Voice section. As shown in the graphs, 64 is subtracted from the value set here and the result is doubled
to determine the actual amount by which the output velocities are adjusted. However, if the resultant
output velocity is less than 1, a value of 1 is used; similarly, if the resultant output velocity is greater than
127, a value of 127 is used.
Settings: 0 – 127
Initial setting: 64
Voice sections where Touch Sensitivity has been changed from the default are displayed with a locked icon.
Velocity actually
output to tone
generator
When Depth (above) = 64
and Offset = 32
When Depth (above) = 64
and Offset = 96
When Depth (above) = 64
and Offset = 64
Velocity with which key is played
Velocity with which key is played
Velocity with which
key is played
Velocity actually
output to tone
generator
Velocity actually
output to tone
generator