User Manual

THR HD_H Utility Operation Manual
12
Troubleshooting
Ifyouexperienceproblems,suchasnosoundorabnormaloperation,firstmakesurethatthe
THR100HD/THR100Hisproperlyconnectedtothecomputer.Iftheproblempersists,pleasecheckthe
followingitems.
l
Theswitchesandbuttonsinthewindowhavenoeffect.
• Isthelatestversionofthe“YamahaSteinbergUSBDriver”installed?
• Alternately,tryreplacingtheUSBcable.
l
An error message appears.
• QuittheUtility,turnofftheTHR100HD/THR100H,andthenperformtheoperationfromthebeginning.
l
AphasereffectcanbeheardwhentheFXLOOPswitchissetto“PARALLEL”.
• WhentheFXLOOPswitchissetto“PARALLEL”,returnonlywetsoundfromtheexternaleffector
totheRETURNjack.
l
ThereisnosoundwhentheFXLOOPswitchissetto“SERIAL”.
• Checktheconnectionsoftheexternaleffector.
l
Whentheamptypeischanged,thespeakersimulationsettingsreverttothoseprior
to changing the settings.
• BesuretoclicktheINSTALLbuttonbeforechangingtheamptype.
l
The speaker simulation sound is low. Crackling is produced.
• AdjusttheGAINknobappropriately.
l
ThespeakersimulationdoesnotaffecttheSPEAKEROUTjacks.
• ThespeakersimulationaffectsonlytheoutputfromtheLINEOUTandPHONESjacks.
Manual Development Group
© 2016 Yamaha Corporation
Published 07/2016 PO-A0