User Manual

THR HD_H Utility Operation Manual
6
Speaker Simulation Settings screen
Thisfunctionrecreatesthecharacterandairinessofsoundasrecordedfromaspeakercabinetwitha
microphoneandoutputsitfromtheLINEOUTandPHONESjacks.
BywritingIRdata(speakerresponsecharacteristics)totheamplifier,variousspeakercabinetand
microphonecombinationscanberecreated.
q
through
r
showIRdatasettingsfortheamplifier.
q
AMPI/IIchanneldisplay(THR100HDonly)
Displaystheamplifierchannel(I/II)whosesettingsaretobechanged.Switchthechannelby
clickingthecorrespondingtab(SpeakerSimulationI/SpeakerSimulationII)atthetopofthewindow.
w
AMPTYPEdisplay
Displaysthetypeselectedfortheamplifier.
*IftheamptypeischangedwhiletheBYPASSswitch
!0
isturnedon(indicatorlit),theBYPASSswitch
!0
willbeturnedoff(indicatoroff).
e
IR name display
DisplaysthenameoftheIRdatacorrespondingwiththeamptype
w
.TheIRnamecanbechanged
byclickingthetext.(maximum63characters)
* Single-byte alphanumeric characters can be used in IR names.
*IftheIRnamecontainscharactersthatcannotbeused,thosecharacterswillappearas“?”.
r
IR gain display
DisplaystheIRgain(dB)correspondingtotheamptype
w
.
q
e
!1 u t !0
w
r
i
o
y