User Manual

THR HD_H Utility Operation Manual
7
t
through
!1
showinformationonthespeakersimulation.WritethespecifiedIRdatatotheamplifier.
t
FOLDERbutton
o
Gain display
y
Folderdisplay
!0
BYPASSswitch
u
Filelist
!1
INSTALL button
i
GAIN knob
1. ClicktheFOLDERbutton
t
,andthenfromthedialogboxthatappears,selectthefoldercontaining
theIRdatafile.Thefoldernameappearsin
y
,andtheIRfilesinthefolderarelistedin
u
.
*OnlyIRfileshavingtheextensions".aif,"".aiff"and".wav"canberecognized.
Supported formats
Bitdepth 16-bit,24-bit,32-bit
No.ofchannels Monauralorstereo
Samplingrate 44.1kHz
IRlength 2048samples
*Double-click[..]tomoveuponefolderlevel.
*Double-click[foldername]tomovetothatfolder.
* Single-byte alphanumeric characters can be used in file names and folder names.
*
Ifthefilenameorfoldernamecontainscharactersthatcannotbeused,thosecharacterswillappearas
questionmarks("?").
2. WiththeampselectorontheTHR100HD/THR100H,selecttheamptypetobeset.
3. ClickanIRfilefromthefilelist
u
toplayasoundusingthatspeakersimulation.
4. IftheBYPASSswitch
!0
isturnedon(indicatorlights),youcancomparethenewsoundwiththeone
withoutspeakersimulation.
q
e
!1 u t !0
w
r
i
o
y