User Manual

THR HD_H Utility Operation Manual
8
5. WhentheBYPASSswitchisturnedonoroff,adjusttheGAINknob
i
sothatthevolumeremains
thesame.
* While an IR file is being selected or data is being transferred to the THR100HD/THR100H after the
BYPASSswitchisoperated,theswitchesandbuttonsinthewindowwillhavenoeffect.Atthistime,
do not operate the amp type selector on the THR100HD/THR100H.
*SincetheIRdatahasnotyetbeenwrittentotheamplifieratthispoint,changingtheamptypereverts
the IR data to that prior to changing the settings.
*IfastereoIRfilewasselected,adialogboxforselectingtheLchorRchmayappear,dependingon
your Utility settings.
6. ClicktheINSTALLbutton
!1
towritetheeditedsettingstotheTHR100HD/THR100H.TheIRname
display
e
andIRgaindisplay
r
changetothefilenameandgainsettingfortheeditedIRfile.
*IftheBYPASSswitch
!0
isturnedon(indicatorlights),datathatdoesnotusethespeakersimulation
is written.
About included IR data
ThefilenamesofincludedIRdataareconfiguredasshownbelow.
l
Example:For“100_American412_57on_Standard”
Element Details
Serialnumber 100
Cabinettype American,4speakers,12inches
Microphonetype 57
OnMic/OffMic on
Microphoneposition Standard
l
Cabinet type
Cabinets:American,British,Brown,F100,THRC212_Dual,THRC212_Single
No.ofspeakers:4,2,1
Speakersize(inches):12
l
Microphone type
57 ShureSM57
87 NeumannU87
l
On Mic/Off Mic
on
Recreatesthedirectspeakersoundasifpickedupfroma
microphoneplacednearthespeaker.
off
Recreatesthespeakersoundandairinessoftheroomasif
pickedupfromamicrophoneplacedfarawayfromthespeaker.
l
Microphone position
Standard Recreatesthesoundofamixofmultiplemicrophones.
Center Recreatesthesoundatthecenterofthespeakerunit.
Edge Recreatesthesoundattheedgeofthespeakerunit.