User Manual

THR HD_H Utility Operation Manual
9
Menu bars and dialogs
Windows version
n
File
Exit:QuitstheTHRHD_HUtilityapplication.
n
Edit
Exceptfor“Properties”,themenucommandsareonlyforeditingtheIRnameintheSpeakerSimulationscreens.
Properties: Clickingthisopensthesettingsdialogboxshownbelow.
FXLOOPSENDConnection(THR100HDonly)
SelectshowLandRsignalsonFXLOOPSENDconnectionare
routed.
•Separate...........ThissendsthePreampIsignaltotheSEND
LchannelandthePreampIIsignaltothe
SENDRchannel.
•Mixed................ThismixesthePreampIandPreampII
signalsandsendsthemtotheSENDL
channelformonooutput.
FXLOOPRETURNConnection(THR100HDonly)
SelectswhethertheL/Rchannelsignalsreceivedfromthe
FXLOOP’sRETURNjackaresenttoPowerAmpI/IIcircuits
independently(Separate)oronlytheLchannelsignalissentto
both(Mixed).
•Separate...........ThissendstheRETURNLsignaltothe
PowerAmpIcircuit,andtheRETURNRto
thePowerAmpIIcircuit.

* To use Power Amp I and II for each of the L
andRsignalsfromastereo-outtypeeffect,
choose Separate.
•Mixed................ThissendsonlytheRETURNLsignaltoboth
thePowerAmpIandPowerAmpIIcircuits.

* WerecommendsettingtheSENDconnection
to Mixed as well when using the Mixed setting
withtheFXLOOPRETURNconnection.
Signal Flow
External Effector(s)
Pre Amplifier I
Pre Amplifier II
Power Amplifier I
Power Amplifier II
L ch
R ch
L ch
R ch
Separate
Mixed
Separate
Mixed
Separate
Mixed
Separate
Mixed
Parallel
Serial
Parallel
Serial
FX LOOP RETURN
Connection
FX LOOP SEND
Connection
* FXLOOPSENDandFXLOOP
RETURNsettingsareavailablein
ampfirmwareV1.10andlater.