English Deutsch 日本語 Series THR Guitar Amplifier THR100HD I + II II MODERN LEAD BOOSTER GAIN MASTER BASS MIDDLE TREBLE PRESENCE REVERB VOLUME INPUT I BOOSTER GAIN MASTER BASS MIDDLE TREBLE PRESENCE REVERB VOLUME INPUT II CRUNCH Pусский I CLEAN SOLID MODERN LEAD CRUNCH CLEAN SOLID THR100H MODERN LEAD BOOSTER GAIN MASTER BASS MIDDLE TREBLE PRESENCE REVERB VOLUME INPUT CRUNCH CLEAN SOLID EN JA DE FR IT Português Español Italiano Français THR100HD / THR100H ES PT
Explanation of Graphical Symbols Explication des symboles The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Address : Telephone : Type of Equipment : Model Name : Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620 714-522-9011 GUITAR AMPLIFIER THR100HD/THR100H This device complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
English THR series Guitar Amplifier THR100HD / THR100H Owner’s Manual Index PRECAUTIONS............................................6 Features....................................................9 Package Contents.........................................9 Names and Functions.................................. 10 Connecting the Cabinet................................ 16 Power Connection...................................... 19 Using the Effect Loop.................................. 19 Using the Footswitch...
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord • Do not place the power cord near heat sources such as heaters or radiators.
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/Power cord • Do not connect the device to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.
NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. n Handling and Maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
Thank you for purchasing the Yamaha THR100HD/100H Guitar Amplifier. In order to get the most out of this product, please read this Owner’s Manual thoroughly before using. After you’ve finished reading the manual, keep it in a safe place for future reference. n Features • Lightweight and compact amp head delivers the sound and tone, as well as volume, sound pressure level, and dynamics you would expect from professional quality tube amplifiers.
Names and Functions THR100HD l Front Panel I MODERN LEAD GAIN MASTER BASS MIDDLE TREBLE PRESENCE REVERB VOLUME INPUT I BOOSTER GAIN MASTER BASS MIDDLE TREBLE PRESENCE REVERB VOLUME INPUT II CLEAN SOLID I + II II BOOSTER CRUNCH MODERN LEAD CRUNCH CLEAN SOLID w e r t y u i o !0 !1 !2 !3 !4 q l Signal Flow External Effector Booster AMP Select Reverb Preamp Speaker Simulation Poweramp Speaker Simulation Booster Preamp Mixer Poweramp Reverb External Effector T
Names and Functions * Speaker and Cabinet When the head and speaker sections of a guitar amplifier are separate, the speaker section is generally called the “cabinet”. As the number of speakers installed in a cabinet varies among designs, this manual will refer to the device that connects to the SPEAKER OUT jack as a “cabinet”, and to the individual speakers as a “speaker”. q INPUT I/II Connect the guitar to this jack.
Names and Functions CRUNCH: Bright clear tone with the dynamic distortion of a British combo amp. CLEAN: Clear, rich clean tone characteristic of an American combo amp. SOLID: Clear tone typical of a solid-state amp.
Names and Functions THR100HD l Rear Panel !5 !6 !7 !8 POWER SECTION I 6V6 POWER SECTION II 6V6 CLASS A EL84 AB 6L6GC 6L6GC 4Ω 8Ω 16Ω A FSW @2 I LINE OUT @7 II AC IN GND LIFT 25W 50W 100W AB EL34 EL34 USB TO CLASS EL84 @1 SPEAKER KT88 KT88 @0 EFFECT LOOP SEND @6 @5 RETURN @4 PHONES SPEAKER OUT 1 IMPEDANCE 4~16Ω CLASS 2 WIRING @3 2 !9 THR100H l Rear Panel POWER SECTION !5 6V6 !6 !7 !8 4Ω 8Ω 16Ω KT88 AB 6L6GC EL34 USB TO FSW EFFECT LOOP SEND RETURN @1
Names and Functions !6 POWER SECTION Tube Class switch Selects the operating type of the tube selected with the Tube Type selector !5. CLASS A: This system delivers excellent response and is highly sensitive to touch, and playing nuances. CLASS AB: This system delivers more power with greater volume. !9 SPEAKER OUT Connects the cabinet to the amp. On the THR100HD, jack 1 and jack 2 signals differ according to the Amp Select switch e setting and whether the SPEAKER OUT 2 jack is connected to a cable.
Names and Functions @3 PHONES This is a stereo mini phone jack for headphones. Like the LINE OUT jack @2, the signal for this jack passes through the speaker simulator. The jack is stereo but output to both L and R terminals is the same (mono). On the THR100HD, both LINE OUT I and II jack signals are mixed and sent to both L and R terminals. * Connecting a plug to the PHONES jack stops output to the SPEAKER OUT 1/2 jacks. Output to the LINE OUT I/II jacks is not affected.
Connecting the Cabinet n Cabinet Specifications Before connecting the cabinet, please check the following two points. l l Cabinet Power Rating Cabinet Impedance n Connections and Settings Connect the amplifier to the cabinet using a commercially available speaker cable (mono phone to mono phone). l Cabinet Power Rating Set the Power Output switch on the amplifier’s rear panel to the value that matches the power rating* of the cabinet being connected to the amp.
Connecting the Cabinet l Connection Example 2 l Connection Example 3 Connecting the THR100HD to a THRC112 (Output Power: 150W, Impedance: 8Ω). Connecting the THR100HD to a pair of THRC112 cabinets (Output Power: 150W, Impedance: 8Ω). CAUTION THR100HD INPUT Always use the SPEAKER OUT 1 jack when connecting a single cabinet to the amp.
Connecting the Cabinet l Connection Example 4 l Connection Example 5 Connecting the THR100HD to the THRC212 (Output Power: 150W, Impedance: 8Ω). Connecting the THR100HD to a pair of THRC112 cabinets (Output Power: 150W, Impedance: 8Ω) and playing two guitars connected to the amp. THR100HD THR100HD INPUT INPUT I I Guitar 1 II 100W 8Ω 8Ω 100W Guitar 2 THRC212 THRC112 DUAL Amp II Sound Amp I Sound The two speakers installed in the THRC212 cabinet operate independently.
Power Connection Connect the supplied power cord to the rear panel AC IN connector, then connect the other end to an AC outlet. Rear Panel AC IN connector Power cord (supplied) CAUTION For safe operation, always connect the ground wire. Using the Effect Loop Use the EFFECT LOOP SEND/RETURN jacks to connect an external effector. (Diagram 1) You can switch the Effect Loop ON/OFF using the included footswitch.
Using the Footswitch Some of the amp’s functions and switch settings can be controlled with your feet using the supplied footswitch. l THR100HD q w e r t y t y l THR100H e r q [THR100HD] AMP I/II t FX LOOP Switches the front panel Amp Select switch setting between AMP I and II. Switches the signal from the rear panel EFFECT LOOP SEND/RETURN jack ON/OFF. Both Amp I and Amp II are switched simultaneously.
More Detailed Settings n Connect to a Computer • Connecting the amplifier to a computer may block the computer’s sound input/output. Switch to another device as needed. Connecting a computer to the amplifier’s USB jack provides access to the following functions. Edit amp settings with the “THR HD_H Utility” editor. l Update the unit’s system firmware. A commercially available USB cable is required to connect a computer to the amplifier.
More Detailed Settings * The “Yamaha Steinberg USB Driver” may be updated without notice. Please visit the above website for the latest details and updates. 2. Install the “Yamaha Steinberg USB Driver” in your computer. Refer to the Installation Guide that is included in the downloaded file. l Installing “THR HD_H Utility” 1. Access the following web site and download the “THR HD_H Utility”. http://download.yamaha.com/ * Check the above website for information on system requirements. 2.
Troubleshooting No power l Is the power cord properly connected? (→ page 19) No sound l l l l l l l l l l l Stopped producing sound while playing 1) The front grill lamp is not lit l Is an instrument properly connected to the INPUT jack? THR100HD: Is the instrument connected to the INPUT II jack? If only a single instrument is being used, it must be connected to the INPUT I jack.
Specifications Digital Section • Built-in Amp Simulations SOLID, CLEAN, CRUNCH, LEAD, MODERN • Built-in Effects BOOSTER (WHITE/GREEN/AMBER*) REVERB (SPRING/PLATE/ROOM/HALL*) NOISE GATE* SPEAKER SIMULATION* * Only available in the “THR HD_H Utility.
Manual Development Group Yamaha Corporation VAC8430-1 版次 : R2 Revised 08/2017 PO-B0
