User Manual

ManualsBrandsYamaha ManualsAmps and AccessoriesTHR-II

THR30II Wireless

Power Button

LED Display

TAP/TUNER Button

Tap to set the tempo of delay

repeats. Press and hold to activate

the tuner.

AMP Knob

Selects the amp model.

AMP Switch

Selects the bank of amp models.

GAIN Knob

Adjusts the amount

of preamp gain.

MASTER Knob

Adjusts the amount of

power amp gain.

BASS Knob

Tone adjustment for the

guitar’s sound about

low-range frequencies.

MIDDLE Knob

Tone adjustment for the

guitar’s sound about the

mid-range frequencies.

TREBLE Knob

Tone adjustment for

the guitar’s sound

about the high-range

frequencies.

EFFECT Knob

Select the type and amount of modulation.

ECHO/REV Knob

Select the type and amount of echo/reverb.

GUITAR Knob

Adjusts the overall

volume of the guitar

sound.

AUDIO Knob

Adjusts the audio playback volume for audio

from the computer connected to the USB jack,

an audio device connected to the AUX jack, or a

smart device connected by Bluetooth.

INPUT Jack

This is a standard phone jack

used to connect a guitar.

HEADPHONE Jack

This is a stereo mini phone jack

used to connect headphones.

AUX Jack

This is a stereo mini phone

jack used to connect an

external audio device.

USER MEMORY Button

Store and recall user presets.

Bluetooth Button

Press and hold for three seconds to

activate Bluetooth pairing. The LED display

will ﬂash in green.

Summary of content (5 pages)

PAGE 1
THR30II Wireless Bluetooth Button EFFECT Knob Press and hold for three seconds to activate Bluetooth pairing. The LED display will flash in green. Select the type and amount of modulation. USER MEMORY Button GAIN Knob BASS Knob ECHO/REV Knob Store and recall user presets. Adjusts the amount of preamp gain. Tone adjustment for the guitar’s sound about low-range frequencies. Select the type and amount of echo/reverb.
PAGE 2
THR10II Wireless & THR10II USER MEMORY Button GAIN Knob BASS Knob EFFECT Knob ECHO/REV Knob Store and recall user presets. Enable Bluetooth by pressing the USER MEMORY button 4 and 5 simultaneously. Adjusts the amount of preamp gain. Tone adjustment for the guitar’s sound about lowrange frequencies. Select the type and amount of modulation. Select the type and amount of echo/reverb. AUX Jack This is a stereo mini phone jack used to connect an external audio device.
PAGE 3
THR30IIA Wireless Bluetooth Button TONE BLEND Knob EFFECT Knob Press and hold for three seconds to activate Bluetooth pairing. The LED display w will flash in green. Blend the direct signal from your guitar with the processed signal from the THR. (Maximum setting produces the mic sound only. Minimum setting produces the direct pickup sound only.) Select the type and amount of modulation. USER MEMORY Button Store and recall user presets. VOLUME Knob Adjusts the overall volume of the guitar sound.
PAGE 4
THR5 GAIN Knob EFFECTS Knob VOLUME Knob Adjusts the amount of guitar distortion. Select the type and amount of modulation. Adjusts the overall volume of the guitar sound. AUX Jack This is a stereo mini phone jack used to connect an external audio device. HEADPHONE Jack Power Switch This is a standard phone jack used to connect a pair of stereo headphones to the unit. It can also be used as a line out jack. LED Display INPUT Jack This jack is used to connect a guitar to the unit.
PAGE 5
THR5A BLEND/GAIN Knob EFFECTS Knob Blends the direct sound of the pickup with the sound of the mic simulation when a MIC TYPE r other than EG CLN is selected (the minimum setting is direct sound only, maximum setting is mic simulation only). When EG CLN is selected as the MIC TYPE, it adjusts the amount of distortion in the guitar sound. Select the type and amount of modulation. Adjusts the overall volume of the guitar sound.