User Manual

15
Names and Functions
@3
PHONES
This is a stereo mini phone jack for headphones.
LiketheLINEOUTjack
@2
, the signal for this
jack passes through the speaker simulator.
 ThejackisstereobutoutputtobothLandR
terminals is the same (mono).
 OntheTHR100HD,bothLINEOUTIandII
jacksignalsaremixedandsenttobothLandR
terminals.
* Connecting a plug to the PHONES jack stops
output to the SPEAKER OUT 1/2 jacks. Output to
the LINE OUT I/II jacks is not affected.
@4
EFFECT LOOP SEND/RETURN
 ThesearetheSENDandRETURNjacksfor
an external effect loop. Please refer to the
“UsingtheEffectLoop”section(
→ page 19) for
instructions on using the effect loop.
* The included footswitch can switch the effect
loop ON/OFF. (→ page 20)
@5
TO FSW (Footswitch)
 Connectorforthefootswitch.Refertothe“Using
the Footswitch” section (
→ page 20) for more
information.
@6
USB
Use a USB cable (sold separately) to connect a
computer to the device.
* Refer to the “More Detailed Settings” section
(→ page 21) for more information.
@7
AC IN
Use the supplied AC power cord to connect the
device to an AC outlet. For safety, please be
sure to connect the ground.