User Manual

20
Using the Footswitch
Someoftheamp’sfunctionsandswitchsettingscanbecontrolledwithyourfeetusingthesuppliedfootswitch.
t
FX LOOP
Switches the signal from the rear panel EFFECT
LOOPSEND/RETURNjackON/OFF.BothAmp
I and Amp II are switched simultaneously.
* When the FX LOOP switch is set to “SERIAL”
with the “THR HD_H Utility” application, no
sound is produced if the loop is activated
without an external effector connected to the
EFFECT LOOP SEND/RETURN jacks.
y
TO AMP
Use the supplied footswitch cable to connect
thisterminaltotheTOFSWterminalontherear
panel of the amp.
CAUTION
Always switch the amplier’s power OFF
before connecting the cable.
q
[THR100HD] AMP I/II
Switches the front panel Amp Select switch
setting between AMP I and II.
w
[THR100HD] Amp I+II
Switches the front panel Amp Select switch to
I+II (lamp lit).
Press the switch again to enable the Amp I/II
switch
q
setting.
e
BOOSTER
 SwitchestheBOOSTERfunctionON/OFF.Both
Amp I and Amp II are switched simultaneously.
* Only switches the BOOSTER function ON/OFF
for the amp that has its front panel BOOSTER
switch in the ON position. The switch has no
effect if both the Amp I and Amp II front panel
BOOSTER switches are in the OFF position.
r
REVERB
 SwitchesthereverbeffectON/OFF.BothAmpI
and Amp II are switched simultaneously.
q
e
w e
r
r t y
t y
l
THR100HD
l
THR100H