User Manual

21
More Detailed Settings
n
Connect to a Computer
Connectingacomputertotheamplier’sUSBjack
provides access to the following functions.
l
Edit amp settings with the “THR HD_H Utility”
editor.
l
Update the unit’s system rmware.
A commercially available USB cable is required to
connectacomputertotheamplier.
Precautions in regard to using the USB jack
Make sure you follow the points below when con-
nectingacomputertotheTHRUSBjack.Failingto
dosomayresultinthecomputerortheTHRfreez-
ing or shutting down, as well as corruption or even
loss of data. If the device or computer does freeze,
restart the application or computer.
CAUTION
•UseonlyanABtypeUSBcablelessthanthree
(3) meters in length. USB 3.0 cables are not
compatible.
•Besuretowakethecomputerfromsuspend-
ed/sleep/ standby mode before connecting a
computer to the USB jack.
•Alwaysquitallapplicationsthatarerunning
on the computer before connecting or discon-
necting the USB cable and set the volume
output on the computer to its minimum level.
•Waitatleast6secondsbetweenconnecting
or disconnecting the USB cable.
•Connectingtheampliertoacomputermay
block the computer’s sound input/output.
Switch to another device as needed.
n
Using the “THR HD_H
Utility”
The “THRHD_HUtility” is a specialized application
that allows the user to perform detailed settings that
cannot be accessed with the panel controls.
l
What You Can Do with the
“THR HD_H Utility”
l
Set the built-in BOOSTER type (3 types).
l
Set the Effect Loop circuit type (serial/parallel).
l
Set the built-in REVERB type (4 types).
l
Set the noise gate level (OFF/1/2/3).
l
Set the speaker simulation for each of the
amplier types.
l
Switch the FX LOOP SEND/RETURN signal
path (Separate/Mixed).
l
To Use the “THR HD_H
Utility”
Beforeconnectingyourcomputertotheamplier,
you will need to download and install the “THRHD_
H Utility” and the required driver from the Yamaha
web site below.
http://download.yamaha.com/
* Check the above website for information on
system requirements.
l
Driver Installation
1. Access the following website and download the
latest version of the “Yamaha Steinberg USB
Driver”,thelewilldecompressandopen.
http://download.yamaha.com/
* Check the above website for information on
system requirements.
* Before using, please understand that even if
your computer meets all operating requirements,
the software may not function correctly.
Computer
USB cable (sold separately)