User Manual

THR HD_H Utility Operation Manual
4
THR HD_H Utility Settings screens
WhentheTHRHD_HUtilitystarts,theconnectedamplifier(THR100HDorTHR100H)isautomatically
detected,andthenasettingsscreenforthecorrespondingampappears.
TheTHRHD_HUtilityhastwosettingsscreens(EffectSettingsandSpeakerSimulation),andthereis
onesettingsscreenforeachamplifierchannel(IandII)withtheTHR100HD.
Selectthedesiredsettingsscreenbyclickingthecorrespondingtabatthetopofthewindow.
l
EffectSettingsscreen
 •THR100HD:EffectSettingsI/II
 •THR100H:EffectSettingsI
l
Speaker Simulation settings screen
 •THR100HD:SpeakerSimulationI/II
 •THR100H:SpeakerSimulationI
n
THR HD_H Utility Operations
• Clickaswitchinthewindowtoswitchthesettingonoroff(theindicatorlightswhen
switchedon).
• Eachcontrolknobcanbeadjustedbyclickingtheknobinthewindow,thenmovingthe
pointer.Youcanalsosettheknobbyclickingthedesiredpositionoftheknob.
• WhensettingsarechangedintheTHRHD_HUtility,thatinformationissentinreal-timeto
theTHR100HD/THR100HthroughtheUSBcableandreflectedontheamplifier.Likewise,
setting changes made with the THR100HD/THR100H control knobs are reflected in the THR
HD_H Utility window.
• SettingschangedintheTHRHD_HUtilityaresavedintheTHR100HD/THR100H,evenafter
quitting the THR HD_H Utility or turning off the THR100HD/THR100H.