User Manual

18
3) Record audio using the Cubase AI applica-
tion.
Install the Cubase AI application (page 16).
Use the supplied USB cable to connect the
computer’s USB jack to the USB jack on the THR
as shown in the diagram below.
Cubase AI lets you record what you play on a
guitar connected to the THR to a computer.
After recording, you can go back and edit the
recorded data.
* For more information on settings and operating, re-
fer to the THR Editor Owner’s Manual, or the Editor’s
Help Menu (refer to the illustration below).
2) Edit THR amp settings using the editing
application on a computer.
Download and install the THR Editor (page 16).
Use the supplied USB cable to connect the
computer’s USB jack to the USB jack on the THR
as shown in the diagram below.
The THR Editor lets you change settings (pa-
rameters) in the THR using the display shown
below. After editing the settings with your com-
puter, you can save them in your computer, and
create a library of sound settings. Holding down
the USER MEMORY button for a few seconds
on the THR10/10C/10X saves the settings being
edited to the unit’s internal memory.
* For more information on settings and operating, re-
fer to the THR Editor Owner’s Manual, or the Editor’s
Help Menu (refer to the illustration below).
Connecting a Computer to the Unit
The THR Editor lets you
edit all parameters on the
THR freely.
On the THR10/10C/10X,
settings made with the
THR Editor can be saved
to USER MEMORY 1-5.
Use Cubase AI to record
and edit what you play
on your guitar con-
nected to the THR.
Help
Help