User Manual

17
n Connections and Operation
1) Playback audio files on the computer
through the THR
Install the Yamaha Steinberg USB Driver, and se-
lect the model name (THR10/THR10C/THR10X/
THR5/THR5A) of the connected THR amp as the
computer’s audio output (page 16).
Use the supplied USB cable to connect the com-
puter’s USB connector to the USB connector on
the THR as shown in the diagram below.
This lets you play audio files on the computer
through the speakers on the THR. Connect
your guitar to the unit and play along. On the
THR10/10C/10X the audio volume is controlled
using the USB/AUX OUTPUT control knob.
* On the THR5/5A, use the volume control on the
computer to adjust the audio volume.
Connecting a Computer to the Unit
l Cubase AI Installation
Included with the THR is a download access code for
Cubase AI music production software. Using Cubase
AI you can record a guitar connected to the THR and
edit songs.
[Cubase AI System Requirements]
Please refer to the Steinberg website at
http://steinberg.net
for the most up-to-date information.
[Installing Cubase AI]
Installing Cubase AI requires an active Internet
connection. Follow the instructions provided in
the “Get CUBASE AI now” sheet to download
and install the software.
Playback an audio
file on the com-
puter.
Use the USB/AUX
OUTPUT control knob
to adjust volume of the
audio file.
Guitar sound
+
audio playback