user manual

4-17
NOTE:
ENG
CYLINDER HEAD
NOTE:
To ensure an even surface, rotate the cylinder
head several times.
EAS00232
INSTALLING THE CYLINDER HEAD
1. Install:
 gasket (New)
1
 dowel pins
2
2. Install:
 cylinder head
 washers
 copper washers
 cylinder head nuts
 Apply engine oil onto the threads of the cylin-
der head nuts.
 Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages.
Cylinder head Cap nut
35 Nm (3.5 mkg)
Cylinder head nut
10 Nm (1.0 mkg)
3. Install:
 exhaust camshaft
 intake camshaft
Refer to “INSTALLING THE CAMSHAFTS”.