user manual

4-38
ENG
CLUTCH
NOTE:
NOTE:
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
 O-ring
1
 short clutch push rod
2
 long clutch push rod
3
 ball
4
 bearing
5
Cracks/damage/wear  Replace the de-
fective part(-s).
2. Measure:
 long clutch push rod bending limit
Out of specification  Replace the long
clutch push rod.
Long clutch push rod bending limit
0.3 mm
INSTALLING THE CLUTCH
1. Install:
 clutch housing
1
Engage the notch of clutch housing and the pro-
jection on the oil pump drive gear.
2. Install:
 bearing
1
 spacer
2
 thrust washer
3
Install the spacer with the two screw holes fac-
ing towards the clutch boss.