user manual

4-62
ENG
OIL PAN
NOTE:
NOTE:
WARNING
NOTE:
EAS00378
INSTALLING THE OIL STRAINER
1. Install:
 oil strainer housing
1
Oil strainer housing bolt
10 Nm (1.0 mkg)
LOCTITE

The arrow
a
on the oil strainer housing must
point towards the front of the engine.
2. Install:
 oil strainer cover
1
 relief valve
2
The arrow
a
on the oil strainer cover must point
towards the front of the engine.
EAS00380
INSTALLING THE OIL PAN
1. Install:
 dowel pins
 gasket (New)
 oil pan
1
 oil level switch
2
 engine oil drain bolt
Always use new copper washers.
 Tighten the oil pan bolts in stages and in a
crisscross pattern.
 Lubricate the oil level switch’s O-ring with en-
gine oil.
Oil pan bolt
10 Nm (1.0 mkg)
Oil level switch bolt
10 Nm (1.0 mkg)