user manual

4-70
ENG
STARTER CLUTCH
EAS00350
CHECKINHG THE STARTER CLUTCH
1. Check:
 starter clutch rollers
1
Damage/wear  Replace.
2. Check:
 starter clutch idle gear
2
 starter clutch drive gear
3
 starter clutch gear
4
Burrs/chips/roughness/wear  Replace
the defective part(-s).
3. Check:
 starter clutch gear’s contacting surfaces
Damage/pitting/wear  Replace the starter
clutch gear.
4. Check:
 starter clutch operation
a. Install the starter clutch gear
4
onto the
starter clutch and hold the starter clutch.
b. When turning the starter clutch drive gear
clockwise
A
, the starter clutch and the start-
er clutch drive gear should engage.
If the starter clutch drive gear and starter
clutch do not engage, the starter clutch is
faulty and must be replaced.
c. When turning the starter clutch drive gear
counterclockwise
B
, it should turn freely.
If the starter clutch drive gear does not turn
freely, the starter clutch is faulty and must be
replaced.
5. Check:
 starter clutch shaft
Bends/damage/wear  Replace.