user manual

5-5
CARB
CARBURETORS
CAUTION:
NOTE:
10. Check:
 jet needle kit
1
 needle jet
2
 main jet
3
 pilot jet
4
 pilot screw
5
Bends/damage/wear  Replace.
Obstruction  Clean.
Blow out the jets with compressed air.
11. Check:
 piston valve movement
Insert the piston valve into the carburetor
body and move it up and down.
Tightness  Replace the piston valve.
12. Check:
 fuel feed pipes
 hose joint
Cracks/damage  Replace.
Obstruction  Clean.
Blow out the pipes with compressed air.
13. Check:
 fuel feed hoses
 fuel hoses
Cracks/damage/wear  Replace.
Obstruction  Clean.
Blow out the hoses with compressed air.
EAS00489
ASSEMBLING THE CARBURETORS
The following procedure applies to both of the
carburetors.
 Before assembling the carburetors, wash
all of the parts in a petroleum-based sol-
vent.
 Always use a new gasket.
1. Install:
 needle jet
1
 pilot jet
 main jet
Align the slot
a
on the needle jet with the pro-
jection
b
on the carburetor body.