user manual

5-7
CARB
CARBURETORS
NOTE:
EAS00493
INSTALLING THE CARBURETORS
1. Adjust:
 carburetor synchronization
Refer to “SYNCHRONIZING THE CARBU-
RETORS” in chapter 3.
2. Adjust:
 engine idling speed
Engine idling speed
1,000  1,100 r/min
Refer to “ADJUSTING THE ENGINE IDLING
SPEED” in chapter 3.
3. Adjust:
 throttle cable free play
Throttle cable free play (at the
flange of the throttle grip)
3  5 mm
Refer to “ADJUSTING THE THROTTLE
CABLE FREE PLAY” in chapter 3.
EAS00497
MEASURING AND ADJUSTING THE FUEL
LEVEL
1. Measure:
 fuel level
a
Out of specification  Adjust.
Fuel level (below the line on the
float chamber)
3.5  4.5 mm
a. Stand the motorcycle on a level surface.
b. Place the motorcycle on a suitable stand to
ensure that the motorcycle is standing
straight up.
c. Install the fuel level gauge
1
to the fuel drain
pipe
2
.
Fuel level gauge
90890-01312
d. Loosen the fuel drain screw
3
.
e. Hold the fuel level gauge vertically next to the
line on the float chamber
f. Measure the fuel level
a
.
Fuel level readings should be equal on both
sides of the carburetor assembly.
2. Adjust:
 fuel level