user manual

6-6
CHAS
FRONT WHEEL AND BRAKE DISCS
NOTE:
NOTE:
NOTE:
CAUTION:
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both brake
discs.
1. Lubricate:
 wheel axle
 oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
 brake disc
1
 Apply LOCTITE

648 to the threads of the
brake disc bolts.
 Tighten the brake disc bolts in stages and in a
crisscross pattern.
3. Install:
 speedometer gear unit
Make sure that the speedometer gear unit and
the wheel hub are installed with the two projec-
tions
a
meshed into the two slots
b
respec-
tively.
4. Install:
 front wheel
Make sure that the slot
a
in the speedometer
gear unit fits over the stopper
b
on the outer
tube.
5. Tighten:
 wheel axle
1
 wheel axle pinch bolt
2
Wheel axle
73 Nm (7.3 mkg)
Wheel axle pinch bolt
19 Nm (1.9 mkg)
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.