user manual

6-11
CHAS
REAR WHEEL, BRAKE DISC AND
REAR WHEEL SPROCKET
WARNING
NOTE:
NOTE:
EAS00561
REMOVING THE REAR WHEEL
1. Stand the motorcycle on a level surface.
Securely support the motorcycle so that
there is no danger of it falling over.
Place the motorcycle on a suitable stand so that
the rear wheel is elevated.
2. Loosen:
 adjusting bolt
1
 locknut
2
3. Remove:
 wheel axle nut
3
 wheel axle
4
 rear wheel
 right collar
5
Push the rear wheel forward and remove the
drive chain from the rear wheel sprocket.
EAS00565
CHECKING THE REAR WHEEL
1. Check:
 wheel axle
 rear wheel
 wheel bearings
 oil seals
Refer to “FRONT WHEEL”.
2. Check:
 tire
 rear wheel
Damage/wear  Replace.
Refer to “INSPECTING THE TIRES” and
“INSPECTING THE WHEELS” in chapter 3.
3. Measure:
 rear wheel radial runout
 rear wheel lateral runout
Refer to “FRONT WHEEL”.