user manual

6-55
CHAS
THE HANDLEBAR
NOTE:
NOTE:
NOTE:
NOTE:
WARNING
WARNING
3. Install:
 handlebar grip
1
 left grip end
2
There should be 1  3 mm of clearance
a
be-
tween the handlebar grip and the left grip end.
4. Install:
 left handlebar switch
1
Align the pin on the left handlebar switch with
the hole
a
in the handlebar.
5. Install:
 master cylinder (clutch)
1
 master cylinder bracket
2
Align the mating surfaces of the master cylinder
with the punch mark
a
on the handlebar.
6. Install:
 throttle grip
1
 throttle cable housing
2
 throttle cables
3
Apply a thin coat of lithium soap base grease
onto the inside of the throttle grip and install it
onto the handlebar.
Make sure that the pin
a
on the throttle
cable housing is aligned with the hole
b
in
the handlebar.
7. Install:
 right grip end
1
 right handlebar switch
2
Make sure that the throttle grip operates
smoothly.