user manual

2-7
SPEC
MAINTENANCE SPECIFICATIONS
Model Standard Limit
Piston rings:
Top ring:
Type
Dimensions (B  T)
End gap (installed)
Side clearance (installed)
2nd ring:
Barrel
1.00  3.05 mm
0.20  0.35 mm
0.045  0.080 mm


0.6 mm
0.1 mm
Type
Dimensions (B  T)
End gap (installed)
Side clearance (installed)
Oil ring:
Taper
1.2  3.0 mm
0.35  0.50 mm
0.03  0.07 mm


0.75 mm
0.1 mm
Dimensions (B  T)
End gap (installed)
Side clearance
2.5  2.9 mm
0.2  0.5 mm
0.050  0.155 mm



Connecting rod:
Oil clearance
0.017  0.040 mm 0.08 mm
Crankshaft:
Crank width “A”
Assembly width “B”
Runout limit “C”
Big end side clearance “D”
Journal oil clearance
62.25  63.85 mm
382.0  383.2 mm
0.02 mm
0.160  0.262 mm
0.030  0.064 mm



0.5 mm
0.09 mm