user manual

7-16
4. Starting circuit cutoff relay
 Disconnect the relay unit from the coupler.
 Connect the pocket tester (Ω  1) and bat-
tery (12 V) to the relay unit terminals as
shown.
YES
Replace the relay
unit.
NO
Battery positive terminal  red/black
Battery negative terminal 
black/yellow
1
2
Tester positive probe  blue/white
Tester negative probe  black
3
4
 Does the starting circuit cutoff relay have
continuity between black and blue/white?
5. Diode
 Disconnect the starting circuit cutoff relay
from the coupler.
 Connect the pocket tester (Ω  1) to the
starting circuit cutoff relay terminals as
shown.
 Measure the starting circuit cutoff relay for
continuity as follows.
YES
Replace the relay
unit.
NO
Tester positive probe 
light green
Tester negative probe 
black/yellow
1
2
Continuity
NOTE:
When you switch the “–” and “+” leads of the
digital pocket tester the readings in the above
chart will be reversed.
 Are the tester readings correct?
EAS00760
Tester positive probe 
black/yellow
Tester negative probe 
light green
2
1
No
continuity
ELEC
ELECTRIC STARTING SYSTEM
EAS00759